Delica Garage Suspension Correction Kit
Delica Garage Billet Suspension Correction Kit,
The Billet Correction Kit is essential when Fitting a 40 – 50mm Lift to a L400 Delica
the kit Corrects the rear swaybar angle reducing Strain on the rear swaybar that causes excessive wear on components,
Brake bias block Corrects the rear brake bias valve height which will allow you to restore Correct front to rear brake balance
Front Ball joint spacers Correcting the front suspension geometry giving a much better alignment and Shortened bump stops
allowing the suspension to travel that extra bit taking full advantage of the lift
The Correction Kit Comes with Zinc Coated bolts and are manufactured locally for delica garage.
Contents of this kit are as follows
2x Upper ball joint spacers with 6x zinc coated bolts
2x Delica Garage Swaybar endlink Spacer saddles with 4x zinc Coated bolts
1x Delica Garage Billet Brake Bias correction Spacer with 2x Zinc Coated bolts
2x Delica garage shortened bump stops with 2x Nyloc nuts
PLEASE NOTE: Due to current freight & supply issues, there is currently a 4 week lead time from time of purchase.
|Dimensions||20 × 10 × 15 cm|